Re: [lro] Speedometer Drive Housing Shims

From: jimfoo (jimfoo@purplemountain.net)
Date: Wed Apr 16 2003 - 19:43:44 EDT

Next message: offroaddesign@softhome.net: "[lro] Re: U-joint buggery"

Previous message: jimfoo: "Re: [lro] U-joint buggery"
In reply to: John Karlsson: "[lro] Speedometer Drive Housing Shims"
Next in thread: Alan J. Richer: "Re: [lro] Speedometer Drive Housing Shims"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

I've used hylomar on mine.

John Karlsson wrote:
>
> Bill,
>
> I posted this question on LRO a while back, but I got no response. What
> sealant, if any, should be used on the speedo housing shims? The original
> (I think -- I bought this '66 in 1970, so it's probably untouched) shims
> from the transmission I'm rebuilding had a dark film that seemed to be
> soluble in lacquer thinner, but the workshop manual doesn't mention any
> sealant. Whatever I did when I rebuilt my other transmission a few years
> ago seemed to work, but I can't remember applying any sealant to the shims.
>
> Thanks!
>
> John
>
> John Karlsson
> 956 Main Street
> P.O. Box 1023
> Hope Valley, RI 02832
> _______________________________________________
> LRO mailing list
> LRO@land-rover.team.net
> http://land-rover.team.net/mailman/listinfo/lro

-- 
Jim Hall
1966 88" Elephant Chaser
http://webs.purplemountain.net/jimfoo/Foospage.htm
"You know, I never really damaged my Rover 'till I started wheeling 
with Jim." Mitch Stockdale
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro

Next message: offroaddesign@softhome.net: "[lro] Re: U-joint buggery"
Previous message: jimfoo: "Re: [lro] U-joint buggery"
In reply to: John Karlsson: "[lro] Speedometer Drive Housing Shims"
Next in thread: Alan J. Richer: "Re: [lro] Speedometer Drive Housing Shims"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b30 : Wed Apr 16 2003 - 19:46:56 EDT