On 3/10/03 1:23 PM, "Simon Harding" <sjharding@schulte-law.com> wrote:
> I'd see if I could get them
> to spray a sample patch ahead of time to check for paint reaction. Then I'd
> do a bunch of the prep myself to the extent possible and see if you can mask
> off any open rivet holes, etc, yourself.
I went through a lot of paper and masking tape to make sure bolt-holes would
not get clogged, and taping off other bits and brackets.
Also scuffed the paint surface to cut the shine and give it some tooth.
Saved a bunch of money by doing the prep-work myself.
--pat.
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro
This archive was generated by hypermail 2b30 : Mon Mar 10 2003 - 20:21:49 EST