--- brian girasoli <fustogrande@yahoo.com> wrote:
> Does anyone know where I can get a set of number
> punches?
Enco carries them and they're not terribly expensive. Go to
www.use-enco.com. Their part # 835-1080 is 3/8" stamps for
11.35 in the Enco brand, and the 1/2" ones (835-1085) are a
little over 17 bucks for the 10 piece set.
I have no finanacial interest yadda,yadda,yadda...spend too
damn much money there for bits and such for my Myford...
A good way to get straight punches (if you need to do this)
is to lay a small piece of 1 X 2 down and clamp it. Use
that as a guide to control the punch positioning, and
strike firmly with a good-sized hammer. This way you'll at
least have a fighting chance to get good readable
impressions.
ajr
=====
The journey is the destination. Anything else is illusion.
Please ignore the following advertising.....
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro
This archive was generated by hypermail 2b30 : Sun Jan 26 2003 - 17:14:37 EST