The bible specifies .015-.020, so I'm at the end of the range.
Zaxcoinc@aol.com wrote:
> No, that's why the can overlap. They can actually expand .019" but
>the gap will "close" at .009"
>
>
That sounds a good bit better, and I've often seen rings like that. Much
more
common to run them at straight or nearly cuts. To check the end gap,
you're
testing them in the bore right? Is the .019" at the
specified range?
Zack
Sounds like you're on to it.
-- Jim Hall 1966 88" Elephant Chaser http://www.users.qwest.net/~jimfoo "You know, I never really damaged my Rover 'till I started wheeling with Jim." Mitch Stockdale
This archive was generated by hypermail 2b30 : Sat May 05 2001 - 15:52:33 EDT