I reread your post, Don't try to enlarge the holes in the Xmember or you
will messup the internal bracing that stops the sides from pulling in
when the bolts are tightened.
John and Muddy
John Cranfield wrote:
>
> It's a question of hole alignment.
> John and Muddy
>
> Henry wrote:
> >
> > Good Evening,
> >
> > I am in the process of purchasing a pintle hitch for a new Canadian ex-MOD
> > trailer I've bought to tow behind my SWB Series III civilian spec Rover. The
> > Rover parts manual shows an adapter plate is required to mount the hitch on
> > the rear crossmember - looks like an easy fab job. Is it necessary to
> > reinforce the civilian spec rear crossmember or is it simply a matter of the
> > holes not lining up? It's only a 1/2 ton trailer - anybody simply hawged out
> > the holes on the crossmember? Thanks in advance....
> >
> > Henry
> > SWB Series III - Eore
> > _______________________________________________
> > LRO mailing list
> > LRO@land-rover.team.net
> > http://land-rover.team.net/mailman/listinfo/lro
> _______________________________________________
> LRO mailing list
> LRO@land-rover.team.net
> http://land-rover.team.net/mailman/listinfo/lro
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro
This archive was generated by hypermail 2b30 : Tue Apr 22 2003 - 22:20:58 EDT