Re: [lro] Cylinder Head results...

• Previous message: TeriAnn Wakeman: "Re: [lro] Roverdrive"
• In reply to: Alan J. Richer: "Re: [lro] Cylinder Head results..."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

>> gotchas or tips you folks have for putting the head back
>> on?

There is very little clearance between the underside of the thermostat
housing and the water pump housing. make sure the wires going along
the front of the engine are clear if this area. I know from experience
that a wire caught in that area can have enough thickness to keep the
head from torquing correctly.

TeriAnn J. Wakeman
      Marigold Ltd.
      www.marigoldltd.com
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro

• Next message: Smokey Briggs: "[lro] vacuum guage was (Roverdrive)"
• Previous message: TeriAnn Wakeman: "Re: [lro] Roverdrive"
• In reply to: Alan J. Richer: "Re: [lro] Cylinder Head results..."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b30 : Fri Apr 18 2003 - 13:59:57 EDT