Wouldn't an old set of points tell them everything they need to know about
where the mounting points are and where the lobe of the cam is in relation
to the bit that rides on the cam? Also, a cap for the 25d dizzy fits the
DM2P4 unit, so there is ample room...
I just got back from an enforced vacation (SWMBO got some recognition at the
salt mine) and I am 170+ messages behind the LRO list - apologies if this
has been covered...
Todd Schlemmer
Vashon Island, WA
www.ozedeph.com
-----Original Message-----
From: lro-admin@koan.team.net [mailto:lro-admin@koan.team.net]On Behalf
Of Gbrovers@aol.com
Sent: Monday, March 24, 2003 7:56 AM
To: lro@koan.team.net
Subject: [lro] Re: [lro] S1 Pertronix was Stock vs Parabolic for
restoration
In a message dated 3/21/03 10:40:56 AM, nullman@centurytel.net writes:
> I am interested in which pertronix you are using in your 80" resto.
> Specifically, which dizzy do you have and did/are you adapting something
to
> fit?
>
> My 2.0 L has a DM2P4 Lucas unit, for which there is no off-the-shelf
> Pertronix unit. I have a unit for the 25d4 dizzy which I may alter to fit
> -
> touchy that.
>
> Thanks
>
> PS parabolics - love 'em - like getting new cushy upholstery.
>
> Todd Schlemmer
>
Todd
As is frequently the case, my potential plans are far ahead of my
execution and I haven't as of yet attempted to install one and after reading
your note I realize that you are correct that there is currently not an
applicable Pertronics available for the early distributor.
On a positive note, I have found Pertronics to be very receptive to
developing new applications because usually all they have to do is supply a
new mounting plate, which is very easy to do. Do you (or anyone else on this
list) happen to have an old worn out Series One distributor they would be
willing to lend to me for a couple of months to supply to them for a sample?
If all else fails I could use the one in my rig but I'm trying to keep the
disassembly to a minimum as I keep removing things and haven't yet actually
put anything back on it yet!
Bill
GBR
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro
This archive was generated by hypermail 2b30 : Fri Mar 28 2003 - 17:02:05 EST