If you are adventurous, you can repair the gauge yourself. The unit works on
vapour pressure of the fluid in the bulb. You need to refill the bulb and
then resolder the capilliary tube. I refilled with ether using a quickstart
can and reconnected the capilliary with a short sleeve of brass tube from
the hobby shop. Check the calibration with a pan of boiling water and away
you go.
Usual disclaimers.
Trevor Easton
Operating Services
905-548-7200 x 2926
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro
This archive was generated by hypermail 2b30 : Tue Mar 25 2003 - 09:36:12 EST