[lro] Re: Britax Seat Belts in a SII

From: C. Marin Faure (cmfaure@earthlink.net)
Date: Fri Mar 07 2003 - 00:14:20 EST

  • Next message: Patrick Parsons: "[lro] Violent Steering Shake"

    From: Paul Quin <pquin@shaw.ca>
    To: lro@koan.team.net
    Subject: [lro] Britax Seat Belts in a SII
    Reply-To: lro@land-rover.team.net

    >I'm not really sure where/how the 3
    point system would mount. Does anyone have any pictures of a 3 point
    system in an 88? Web page or e-mail is fine. Any good verbal
    descriptions would help too!

    The upper attach point is a large bolt that threads into a welded nut or
    some such thing high up on the panel aft of the front door opening. The
    lower outside attach point is a fitting bolted through the aft end of the
    seat base flange next to the door opening. The third attach point is, of
    course, the buckle clip or latch that's on the end of a "stalk" that
    fastens to the seat box immediately ahead of the bulkhead that runs behind
    the seats. This is fastened in a manner similar to the upper attach point,
    using a large bolt that goes through the seat box upper panel and threads
    into a welded-on nut underneath.

    ________________________
    C. Marin Faure
      (original owner)
      1973 Land Rover Series III-88
      1991 Range Rover Vogue SE
       Seattle, WA
       marin.faure@boeing.com
       faurecm@earthlink.net
    _______________________________________________
    LRO mailing list
    LRO@land-rover.team.net
    http://land-rover.team.net/mailman/listinfo/lro



    This archive was generated by hypermail 2b30 : Fri Mar 07 2003 - 01:48:58 EST