Hi Marin,, You're back. Where have you been
Mark
"C. Marin Faure" wrote:
> From: Paul Quin <pquin@shaw.ca>
> To: lro@koan.team.net
> Subject: [lro] Britax Seat Belts in a SII
> Reply-To: lro@land-rover.team.net
>
> >I'm not really sure where/how the 3
> point system would mount. Does anyone have any pictures of a 3 point
> system in an 88? Web page or e-mail is fine. Any good verbal
> descriptions would help too!
>
> The upper attach point is a large bolt that threads into a welded nut or
> some such thing high up on the panel aft of the front door opening. The
> lower outside attach point is a fitting bolted through the aft end of the
> seat base flange next to the door opening. The third attach point is, of
> course, the buckle clip or latch that's on the end of a "stalk" that
> fastens to the seat box immediately ahead of the bulkhead that runs behind
> the seats. This is fastened in a manner similar to the upper attach point,
> using a large bolt that goes through the seat box upper panel and threads
> into a welded-on nut underneath.
>
> ________________________
> C. Marin Faure
> (original owner)
> 1973 Land Rover Series III-88
> 1991 Range Rover Vogue SE
> Seattle, WA
> marin.faure@boeing.com
> faurecm@earthlink.net
> _______________________________________________
> LRO mailing list
> LRO@land-rover.team.net
> http://land-rover.team.net/mailman/listinfo/lro
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro
This archive was generated by hypermail 2b30 : Fri Mar 07 2003 - 14:16:29 EST