Re: [lro] Ashcroft

From: Ian Stuart (Ian.Stuart@ed.ac.uk)
Date: Fri Jan 31 2003 - 03:59:43 EST

  • Next message: Ian Stuart: "Re: [lro] Is it a good idea to fit a Tdi200 on a series IIA ? do I have to do any changes in the rest of the drive chain ???"

    On Wed, 2003-01-29 at 18:00, Kirk Hillman wrote:
    >
    > Ian wrote:
    > > I'd also like to ,point out that my (slightly tweeked) LR 2.0 will allow
    > > my 80" to cruise at 55mph quite happily (with an overdrive)
    > > If I push it, I can get 60.
    > > With a tail-wind, or a downhill road, I can get 65.
    >
    > Please remind us what your 'slightly tweaked is...
    Pistons from the rover 3ltr engine (higher crown -> higher compression);
    inlet & exhaust ports opened out; balanced; SU carb.

    Basically, the same as you can do with a 2.25 head - or by buying an ACR
    system.

    -- 
    --==++
    Ian Stuart: Edinburgh University Data Library.
    

    Information is not knowledge Knowledge is not wisdom Wisdom is not truth Truth is not beauty Beauty is not love Love is not music -- Mary.

    Personal web site: http://lucas.ucs.ed.ac.uk/ _______________________________________________ LRO mailing list LRO@land-rover.team.net http://land-rover.team.net/mailman/listinfo/lro



    This archive was generated by hypermail 2b30 : Fri Jan 31 2003 - 04:18:03 EST