Re: [lro] tranny input shaft--time sensitive

From: Alan J. Richer (mrchurchill109@yahoo.com)
Date: Fri Jan 17 2003 - 15:22:52 EST

  • Next message: NADdMD@aol.com: "Re: [lro] tranny input shaft--time sensitive"

    I remember the input shaft having a fair amount of slop in
    it when I last had a transmission in my grubby mitts.

                 ajr

    --- "William J. Rice" <jarvis64@juno.com> wrote:
    >
    > Hey y'all:
    > How much slop should be in this? I am about to put a new
    > (well, you know
    > . . ) tranny in Mrs. Merdle and am replacing the synchro
    > right now. I've
    > noticed that there's LOTS of slop in the input shaft--it
    > can wiggle side
    > to side a good bit. Does this mean that that bearing is
    > shot?
    > Pls. answer quickly since I'll obviously not put the
    > bellhousing back on
    > this afternoon if I need to replace that bearing.
    >
    > yours,
    > bill
    > _______________________________________________
    > LRO mailing list
    > LRO@land-rover.team.net
    > http://land-rover.team.net/mailman/listinfo/lro

    =====
    The journey is the destination. Anything else is illusion.

    Please ignore the following advertising.....
    Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
    http://mailplus.yahoo.com
    _______________________________________________
    LRO mailing list
    LRO@land-rover.team.net
    http://land-rover.team.net/mailman/listinfo/lro



    This archive was generated by hypermail 2b30 : Fri Jan 17 2003 - 15:23:49 EST