--- Kirk Hillman <hillman88@telus.net> wrote:
>
> Correct me if I am wrong, but isn't PPG an industrial
> coating much harder
> and thus brittle than an alkyd enamel?
Nope - stuff Richard was using was an automotive paint.
When I shot Mr. C lo these many years ago I used a simple
two-pack automotive enamel. The one I used was PPG Delstar
- worked great and sprayed with little difficulty.
As a matter of fact I just sprayed the rebuilt bulkhead of
Mr. C with the remains of the paint I bought lo these many
years ago and it was as good as the day I bought it.
Do yourself a favor - nose around a bit more and see if you
can find a PPG dealer. They can cross the Ditzler numbers
available in the FAQ up on OVLR.Org.
ajr
=====
The journey is the destination. Anything else is illusion.
Please ignore the following advertising.....
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro
This archive was generated by hypermail 2b30 : Fri Dec 20 2002 - 13:59:18 EST