Re: [lro] Brake pad installation

From: Stephen West-Fisher (steve@coastaldatasystems.com)
Date: Mon Dec 16 2002 - 14:06:18 EST

Next message: Peter Ogilvie: "Re: [lro] Brake pad installation"

Previous message: Alan J. Richer: "[lro] Special Purpose tools: Re: Brake pad installation:"
Next in thread: Alan J. Richer: "[lro] Special Purpose tools: Re: Brake pad installation:"
Reply: Alan J. Richer: "[lro] Special Purpose tools: Re: Brake pad installation:"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Alan J. Richer wrote:
>>Any suggestions? Special installation tool?
>>
>
>
> Yes, a pair of channellock pliers. Put the shoe in place in
> the cylinder, then clamp a pair of channellocks on the
> buttom and pull it forward till you can drop it inot the
> notch on the back of the other cylinder. Repeat.
>

Or go buy a spring tool for the holidays :-)

-- 
Stephen West-Fisher
Coastal Data Systems
727.418.9774
http://www.coastaldatasystems.com/
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro

Next message: Peter Ogilvie: "Re: [lro] Brake pad installation"
Previous message: Alan J. Richer: "[lro] Special Purpose tools: Re: Brake pad installation:"
Next in thread: Alan J. Richer: "[lro] Special Purpose tools: Re: Brake pad installation:"
Reply: Alan J. Richer: "[lro] Special Purpose tools: Re: Brake pad installation:"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b30 : Mon Dec 16 2002 - 16:50:48 EST