>Tom Proctor <t_proctor@daido.net> wrote:
>
>>John Karlsson wrote:
>
>>> I get mine (for dual motors) at West Marine.
>>> Stainless steel arms, and a nice clamp mechanism
>
>>Are these the type that have the tall (or thick depending how you look
>>at it) rubber blade with a bolt and acorn nut securing it to the wiper
>>arm? I've seen these on boats and want them for my 109...
>
>Anco makes an adjustable wiper arm. The Rover unit has the top-hat shaped
>adapter on the wiper's spindle which has one set screw. The Anco unit has
>a cylinder-shaped adapter with two allen screws, but the center hole in the
>Anco adapter has to be enlarged a milli-micron or so with a rat-tail file -
>or a proper drill size (which I can never find when I need it). The Anco
>kit also has little rubber gromet thingies which keep water from running
>down the wiper's shaft into the wheelbox - or motor. The last time I went
>looking for mere wiper blades, I had to go to 6 places, as no one carries
>10" refills anymore. 11" will work, but just barely.
Is this arm part number 51-062? I looked at one somewhere, and wasn't
sure it would work. Heavy duty truck parts places often have 10"
wiper arms, by the way.
DAvid
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro
This archive was generated by hypermail 2b30 : Fri Nov 22 2002 - 12:06:34 EST