Tom Proctor <t_proctor@daido.net> wrote:
>John Karlsson wrote:
>> I get mine (for dual motors) at West Marine.
>> Stainless steel arms, and a nice clamp mechanism
>Are these the type that have the tall (or thick depending how you look
>at it) rubber blade with a bolt and acorn nut securing it to the wiper
>arm? I've seen these on boats and want them for my 109...
Anco makes an adjustable wiper arm. The Rover unit has the top-hat shaped
adapter on the wiper's spindle which has one set screw. The Anco unit has
a cylinder-shaped adapter with two allen screws, but the center hole in the
Anco adapter has to be enlarged a milli-micron or so with a rat-tail file -
or a proper drill size (which I can never find when I need it). The Anco
kit also has little rubber gromet thingies which keep water from running
down the wiper's shaft into the wheelbox - or motor. The last time I went
looking for mere wiper blades, I had to go to 6 places, as no one carries
10" refills anymore. 11" will work, but just barely.
Cheers
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro
This archive was generated by hypermail 2b30 : Fri Nov 22 2002 - 10:59:20 EST