J-L,
Let me know if you don't have any luck locally. I have one I can send out.
Bryan
62 88
70 109 "Genie"
On Fri, 18 May 2001, "Jean-Leon Morin" wrote:
>
> Hello list,
>
> through my trials and tribulations (4000 km road trip), I have managed to
> break the tranny output shaft on my transmission.
>
> I am now looking for a transmission output shaft... Here's the catch. I have
> a ford tranny. I only need a certain part of the rover tranny output
> shaft,that will be grafted to the ford tranny. I am looking for the bit that
> fits into the transfer case, from about 1/2" past the splines, to the end.
>
> If anyone in the Ottawa area has a toasted (I do mean dead) transmission, or
> has one of these shafts loose, I want it! Remember, the end that is splined
> for the tranny does not have to be good. I just need the T case end, the
> rest will be made into razor blades. Broken, beat or bashed shafts welcome,
> as long as the T case end is good...
>
> thanks,
>
> Jean-Leon Morin
> AKA "Dr. Detroit"
>
> Valdez - 1966 IIA 109 freak
> Slagmobile - 195? II parts bin
________________________________________________
PeoplePC: It's for people. And it's just smart.
http://www.peoplepc.com
This archive was generated by hypermail 2b30 : Fri May 18 2001 - 14:01:32 EDT