Winn, the core of the 2.25 and 2.6 L rads are the same. There is a
difference in the inlet /outlet pipe positions. ISTR that the top
connection is at the side on the 2.6 and in the center on the 2.25
The core is 439 mm between headers, 458 wide and 52 mm deep, ( 3 row -
10 fins per inch) or 73 mm deep on the ser2. There are a number of
factors to be considered when comparing performance, the type and the
spacing of the fin (fin density) are significant. I believe that the
core thickness was reduced when the fin was changed to a higher
performance type.
Regards from Western New York State
Bill Leacock.
aged 21 (33 times)
This archive was generated by hypermail 2b30 : Mon Apr 09 2001 - 20:52:27 EDT