Re: [lro] U-joint buggery solved

From: Patrick Parsons (patrickparsons@hawaii.rr.com)
Date: Tue Apr 22 2003 - 06:27:48 EDT

Next message: cgj94@sympatico.ca: "[lro] Capstan winch"

Previous message: Phillip Simpson: "[lro] Re: Wheel studs and wolfe wheels (Mike Rogers)"
In reply to: Ian Stuart: "Re: [lro] U-joint buggery solved"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 4/21/03 10:23 PM, "Ian Stuart" <Ian.Stuart@ed.ac.uk> wrote:

>> Anyway, I thought the grub screw would hold the drum on while the shaft was
>> off. I guessed wrong. Lost the screw in the process of driving around. Now
>> the shaft is all that holds it on.

> The big castillated nut'n'splitpin should hold the drum in place...

Sorry, I meant the hand brake drum, and on a 93 110. The only thing that
held the drum on, other than the propshaft flange, was a countersunk machine
screw.

--pat.
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro

Next message: cgj94@sympatico.ca: "[lro] Capstan winch"
Previous message: Phillip Simpson: "[lro] Re: Wheel studs and wolfe wheels (Mike Rogers)"
In reply to: Ian Stuart: "Re: [lro] U-joint buggery solved"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b30 : Tue Apr 22 2003 - 06:26:44 EDT