Re: [lro] K&N Filter for Weber single barrel

From: Keith Tanner (keith@miata.net)
Date: Mon Apr 21 2003 - 10:20:12 EDT

Next message: Keith Tanner: "Re: [lro] Clutch MC fittings and Crank-Drive Koenig bolts?"

Previous message: John Cranfield: "Re: [lro] Someone is funny - Testing"
Next in thread: Ron Ward: "Re: [lro] K&N Filter for Weber single barrel"
Reply: Ron Ward: "Re: [lro] K&N Filter for Weber single barrel"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

According to the listing at http://www.knfilter.com, RU-0690 is a 5.5"
diameter, 3.5" long round filter with a 2.25" ID inlet. RU-0660 is 5.5" x
3", but has the inlet offset by 13/16".

Keith

At 20:13 20/04/03, you wrote:

>Can't find a replacement for the worn and torn K&N on top of my weber on the
>109. The part number written on the filter's bottom is FO24D6 and doesn't
>turn up on any K&N retailer listing. It is round and measures 5" across, 3"
>in height, and has a 2.25" inside diameter opening to clamp to the top of the
>Weber body. Anyone?
>
>Ron Ward
>_______________________________________________
>LRO mailing list
>LRO@land-rover.team.net
>http://land-rover.team.net/mailman/listinfo/lro
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro

Next message: Keith Tanner: "Re: [lro] Clutch MC fittings and Crank-Drive Koenig bolts?"
Previous message: John Cranfield: "Re: [lro] Someone is funny - Testing"
Next in thread: Ron Ward: "Re: [lro] K&N Filter for Weber single barrel"
Reply: Ron Ward: "Re: [lro] K&N Filter for Weber single barrel"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b30 : Mon Apr 21 2003 - 10:27:49 EDT