A good source for very good rings is Hastings mfg in Hastings Michigan.
They made a set of 040 for my series one a number of years ago. They do
have a lot on the shelf.
http://www.hastingsmanufacturing.com
Bob B
At 04:30 PM 4/14/2003, you wrote:
>The rings are only about a year old, and are the much more difficult to
>find .060 variety.
>
>Alan J. Richer wrote:
>
> > > My
> > > cylinders look fine
> > > and I don't really care to pull the rest of the engine
> > > apart if MM oil
> > > or ATF can fix the problem.
> >
> > Try it - you've little to lose - but I think a honing and a
> > new set of rings would be a much better bet and easy to do.
>
>--
>Jim Hall
>1966 88" Elephant Chaser
>http://webs.purplemountain.net/jimfoo/Foospage.htm
>"You know, I never really damaged my Rover 'till I started wheeling
>with Jim." Mitch Stockdale
>_______________________________________________
>LRO mailing list
>LRO@land-rover.team.net
>http://land-rover.team.net/mailman/listinfo/lro
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro
This archive was generated by hypermail 2b30 : Tue Apr 15 2003 - 09:25:51 EDT