Manifold leak:
Loosen all of the fasteners - especially the 4 holding the
intake to the exhaust manifolds.Not too losse, but enough
so they can shift in relation to each other.
Retorque all the manifold hardware to the block, THEN
tighten the 4 studs holding the manifolds together. From
the sound of it you might have the manifolds misaligned -
one sticking out past the other.
ajr
=====
The journey is the destination. Anything else is illusion.
Please ignore the following advertising.....
Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
http://platinum.yahoo.com
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro
This archive was generated by hypermail 2b30 : Fri Mar 28 2003 - 21:57:58 EST