[lro] Re: Roverdrive vs. High Ratio transfer Box

From: Tim Czajka (timczajka@hotmail.com)
Date: Thu Mar 06 2003 - 12:41:12 EST

  • Next message: Mark Pilkington: "Re: [lro] Re: Roverdrive vs. High Ratio transfer Box"

    Mark Pilkington wrote:
    >It is an Overdrive unit with an "H" shaped box. There will be a high side a
    >neutral side and a nasty low side. There will be something like 16 forward
    >gears and 3 reverse ...
    >

    Sounds interesting but will this be a box that bolts on
    like the Roverdrive, or one that sandwiches somewhere in
    the drivetrain? The latter would require a shortened
    rear driveshaft which could be a problem on the 88s.

    Tim Czajka
    1972 Series III 88

    _________________________________________________________________
    _______________________________________________
    LRO mailing list
    LRO@land-rover.team.net
    http://land-rover.team.net/mailman/listinfo/lro

    This archive was generated by hypermail 2b30 : Thu Mar 06 2003 - 14:29:55 EST