Bob wrote:
Hi there,
Just wondering if anyone on the list knows where I could find the top drop
arm
into the steering relay box for a series IIB Forward Control. The splines on
the arm have worn, causing a lot of play in the steering (too much to
keep...
Bob:
The diagram in my SIIB parts book shows the top arm (part # 531497) looking
much like the bottom arm which looks like the lower arm of a regular Rover.
Looking at the vehicle it seems the upper arm has more ofset to allow the
rod from the steering box to run inside the frame channel. You might
measure the offset and length of the lower arm of an 88" or 109" to see if
it will fit. The only other sucess I've had is a Dunsfold in the UK. They
have lots of obscure stuff but they cherge through the nose. You might try
the FC list also.
Good luck - Steve Rochna, Fallon, NV
1972 SIII 88"
1968 SIIB 110"FC
--- [This E-mail scanned for viruses by Oasis Online] _______________________________________________ LRO mailing list LRO@land-rover.team.net http://land-rover.team.net/mailman/listinfo/lro
This archive was generated by hypermail 2b30 : Sun Mar 02 2003 - 12:34:39 EST