Photo of the appropriate bits on a 1967 IIa:
http://keith.miata.net/landy/images/at_home_5.jpg
Works nicely, especially if you open up the hole in the bulkhead for the
heater box.
Keith
At 13:14 1/30/03, you wrote:
>I have two sets of defrost pans, one of which I will install in my 1967 IIa
>(exMoD 109). Question is, which one is age appropriate for my Landie?
>
>A. The two metal box sections, each with a single hose entry?
>B. The metal strip, a tad shorter than the windscreen width, with two plastic
>ducts on it?
>
>FWIW, B has a smaller hose diameter than A.
>
>Next question, does one of the above work better than the other (when coupled
>to a Kodiak IV)?
>
>Tom Proctor
>_______________________________________________
>LRO mailing list
>LRO@land-rover.team.net
>http://land-rover.team.net/mailman/listinfo/lro
------------
Keith's page de home:
http://keith.miata.net
------------
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro
This archive was generated by hypermail 2b30 : Thu Jan 30 2003 - 17:25:37 EST