On Thu, 30 Jan 2003, "Jean-Leon Morin" wrote:
>> I have found 70:1 to be too low for most applications
>> and have never needed anything lower...
It's reassuring to read these comments, as I have my chev
250, sm465, and series tc (not sure how this is going to
mate up yet) and salisbury/rover(front) 3.54's ready for my
109. My 1st gear low range final drive will be 54.4 to 1.
On the upper end I should be able to maintain 70 below 3000
rpm. 60mph will be something like 2500 rpm. It's just a lot
of time and money away from completion.
Bryan
________________________________________________
PeoplePC: It's for people. And it's just smart.
http://www.peoplepc.com
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro
This archive was generated by hypermail 2b30 : Thu Jan 30 2003 - 15:19:35 EST