>What options are there for keeping the military dual belt system, when
>switching from a generator to alternator. Is there suitable dual pulley for a
>10si/12si? Can I transfer the generator dual pulley to the alternator?
The 10si and 12si are available with a dual pulley. It takes a pair
of 1/2" V belts; I think the belt to belt spacing is 1". (I can
measure if you need me to.) The stock single pulley lines up with
the front groove of the dual pulley with little or no spacing. It
would not be a lot of work to fabricate a spacer to move the
alternator forward an inch or so, if that's what was needed. A stack
of washers or a piece of tube would be enough. (I've done that on
other engines to get things lined up, with no problems.)
David
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro
This archive was generated by hypermail 2b30 : Wed Jan 29 2003 - 16:55:20 EST