Steve,
Check that sediment bowl for proper alignment and seal of the rubber gasket
around the top. If any air can get it, you'll never get a vacuum.
Ron Ward
----- Original Message -----
From: "Steve Lister" <steve_lister@voyager.net>
To: <lro@koan.team.net>
Sent: Sunday, January 19, 2003 7:10 PM
Subject: [lro] Diesel Fuel System
>
> I just changed my fuel filter on a 1972 SIII 109" and after reading the
> "descriptive" Haynes manual it devotes about two sentences to the
> process of bleeding the system. I have been pumping the hand primer on
> the bottom of the fuel pump for quite some time and still I am not
> getting any fuel from the vent at the top of the filter body. How long
> does it typically take to fill the bowl and get enough diesel in it to
> squirt out? Help.
>
> Regards,
> Steve
> _______________________________________________
> LRO mailing list
> LRO@land-rover.team.net
> http://land-rover.team.net/mailman/listinfo/lro
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro
This archive was generated by hypermail 2b30 : Sun Jan 19 2003 - 19:34:36 EST