Re: [lro] 2.25 Compression

From: John Cranfield (john.cranfield@ns.sympatico.ca)
Date: Mon Jan 13 2003 - 08:54:29 EST

  • Next message: Tom Proctor: "[lro] adding alpine windows to hard top..."

    Yeah. wot he said.
    John and Muddy

    Easton Trevor A wrote:
    >
    > Shimming won't make any difference to the total height of the screw and
    > pushrod above the block face, so contact with the rocker cover may still be
    > a problem. Also it will result in a change in the contact between the valve
    > stem and rocker which may be detrimental to the wear pattern and side
    > loading.
    > Aren't the pushrods tubular? Shortened rods could be easily created by
    > fitting the ends into shorter tubes. Even go exotic and use titanium tubes
    > to lighten the valve gear.
    > _______________________________________________
    > LRO mailing list
    > LRO@land-rover.team.net
    > http://land-rover.team.net/mailman/listinfo/lro
    _______________________________________________
    LRO mailing list
    LRO@land-rover.team.net
    http://land-rover.team.net/mailman/listinfo/lro

    This archive was generated by hypermail 2b30 : Mon Jan 13 2003 - 08:54:03 EST