POR-15 works just fine on sandblasted metal. I have used it extensively in
my rebuild.
Mike
> -----Original Message-----
> From: IBEdwardp@aol.com [mailto:IBEdwardp@aol.com]
> Sent: Tuesday, June 19, 2001 7:44 PM
> To: lro@Works.Team.Net
> Subject: Re: LRO: More opinions sought
>
>
> In a message dated 6/19/01 8:22:30 PM Eastern Daylight Time,
> paddlers@nwlink.com writes:
>
> > Now once I have
> > it down to raw steel I have two choices.
> >
> > A) I can give it a coat of POR 15.
> >
> I had thought that POR 15 needed to react with some amount of
> rust in order
> to work properly. Would it work if you sandblasted to bare metal?
>
> Ed Bailey
> 66 S2A SWB (Millennium Falcon)
> Somewhere in East Tennessee
>
This archive was generated by hypermail 2b30 : Wed Jun 20 2001 - 18:42:28 EDT