I have the green bible, have a rebuild kit on the way but I've never
rebuilt a carb before. I'd appreciate any tips on what to look for,
tricky bits, etc. I've already been told to check the float for a leak.
I've seen the warpage problem and the glass plate /emery
paper/annealling fix mentioned but have to admit the details are foggy,
so if someone can point me to a web page or give me a quick run down of
that procedure I'd be grateful.
Simon H.
This archive was generated by hypermail 2b30 : Mon Jun 18 2001 - 18:26:30 EDT