>Adding a Midget tach and an aux fuel gauge to the rover. The voltage
>stabilizer already has both output terminals being used by the regular fuel
>gauge and engine temp gauges. Can I splice in the tach and aux fuel gauge
>into the terminals already being used, in effect having 2 gauges on each
>stabilizer terminal? Or should I run a fresh lead from the fuse block into
>another stabilizer and from there into the 2 new gauges? I just don't want
>to overload the stabilizer (if that's even possible)...
I'm running a MGB tach, 2 MGB fuel gauges and a TR6 water temperature
gauge of a single Lucas voltage stabilizer I got of the donor MGB.
Everything seems to work fine.
>
>Also, how would I wire in a voltmeter. Running a standard 2.25 with a Lucas
>(I believe) alternator? Very specific instructions would help my rookie
>self.
One wire goes to switched 12V, the other to chasis ground.
TeriAnn Wakeman Marigold Ltd.
Santa Cruz, California Web design, site updating, testing
webmaster@overlander.net search engine optimization, graphics
and more
http://www.overlander.net/Marigold/index.html
This archive was generated by hypermail 2b30 : Wed May 16 2001 - 14:25:48 EDT