Paul Quin wrote:
> One problem has cropped up though... I replaced the manifold to head
> gasket (old SII style one piece unit), most of the manifold bolt / studs,
> and the carb packing block and bottom gaskets. Now I have what sounds like
> a vacuum leak. Once warmed up, a whistling starts. The Land Rover sounds
Same torque on all the studs?. Clean mating surfaces?. Gasket intact? (No groves
from bends). Tighten the clamps on the brake vaccum hose?. Brake vacuum hose
intact?. Tighten the locknut on brake vacuum pipe?. Check dizzy vacuum rubbers &
line?. Check carb fitting? (Studs, nuts, adapter, gasket). Check if tea on
garage hot plate is about ready?
What did i miss?
rgds
sv/aurens
This archive was generated by hypermail 2b30 : Thu May 10 2001 - 09:17:23 EDT