How about doing away with the studs/bolts completely and brazing in a piece
of plate. At the same time the flow path for the exhaust could be smoothed.
No going back of course but manifolds are not unobtainable.
> -----Original Message-----
> From: Kirk Hillman [SMTP:kdhillma@telusplanet.net]
> Sent: Monday, May 07, 2001 10:11 PM
> To: lro@Works.Team.Net
> Subject: LRO: Re: Peirce WEbber manifold
>
> Bill,
> Right you are about there not being enough room. Your idea about the
> bolts is ideal. I just can't get the darn studs out.
This archive was generated by hypermail 2b30 : Tue May 08 2001 - 14:18:13 EDT