There is only 1 screw on mine (The fronts have three). There is a second
hole, I'll try a bolt and see if that helps.
Colin
----- Original Message -----
From: "David Scheidt" <dscheidt@tumbolia.com>
To: <lro@Works.Team.Net>
Sent: Sunday, April 29, 2001 7:50 PM
Subject: Re: LRO: Brake Drum Removal
> On Sun, 29 Apr 2001, Colin Clegg wrote:
>
> :Hi
> :
> :I have a SWB Series 3 and I am trying to remove the brake drums on the
rear
> :wheels to replace the wheel cylinders. The only problem is that they
will
> :not shift.
>
> Make sure you've got all the screws off. loosen the brakes, and beat on
it
> with a rubber mallet. On genuine drums, there's a fourth threaded hole in
> the drum. Insaead of having a hole in the hub behind it, it's got the
hub.
> YHou can thread a bolt (same thread as the screws, but you want something
> with a hex head and force it off that way.
> :
>
> --
> dscheidt@tumbolia.com
> Bipedalism is only a fad.
>
>
>
This archive was generated by hypermail 2b30 : Sun Apr 29 2001 - 17:20:58 EDT