Jim,
Are you running the 2.25? Any modifications to your rig that may have
contributed?
Lonn
----- Original Message -----
From: "Jim Hall" <jimfoo@qwest.net>
To: <lro@works.team.net>
Sent: Thursday, April 26, 2001 5:58 PM
Subject: Re: LRO: Re: Axles
> I broke my front axle in Moab trying to go up a very steep, rough
rock.
> I'm sure it broke because the front end was bouncing and I was at
full
> throttle. Bill from Great Basin has some stronger ones, but you need
to
> upgrade to 24 spline. I think most normal folks would be fine with
the
> stock setup however.
>
> Lonn Howard wrote:
> >
> > Hey J-L,
> >
> > I have stomped and romped pretty hard on my stock front axle, both
on grabby
> > hard-pack and on sand. I figured that if I was going to grenade
something
> > it would be best to try do it close to home.
> > All of that said, I would still like to beef up the front diff
just to be
> > safer.
>
> --
> Jim Hall
> 1966 88" Elephant Chaser
> http://www.users.qwest.net/~jimfoo
> "You know, I never really damaged my Rover 'till I started wheeling
> with Jim." Mitch Stockdale
>
This archive was generated by hypermail 2b30 : Fri Apr 27 2001 - 11:30:56 EDT