Weber 34ICH Installation helpKeith,
I feel your pain. I did the conversion myself and did a bunch of head scratching and mumbling trying to figure out the linkage problem too.
I finally did the reversing procedure, but then, to get the spring action to work right, I just found a place to hook it, and it worked. Not very scientific, but it works. Sorry I can't give you any more detail on what I did... Just know that someone out there understands your confusion.
Eric Mang
'63 Series IIa
"Swamp Thing"
----- Original Message -----
From: Keith Elliott
To: 'lro@works.team.net'
Sent: Tuesday, April 24, 2001 3:41 PM
Subject: LRO: Weber 34ICH Installation help
Hi Everyone...
I'm sure that someone here has installed a weber on a 2.25 that used to have a Solex right... Well I have installed mine and for the life of me I cannot figure out how to get the linkage to work properly (ie. pull down instead of push up). People I have asked have told me that the linkage has to be reversed, which makes perfect sense but when I try and do it I get very confused. I have reversed the lever (bellcrank?) that is connected to the arm that comes from the pedal (does this make any sense already?!?!?!) so now the arm connects to it at the top instead of the bottom. I think that this is right, it is the other lever that has the bend in it and connects to the throttle lever of the carb that I can't figure out. there is a sprint that connects to this lever and then to the cap at the end. When I turn this lever around I can't put the spring on and when I finally did figure out how to put the spring on the spring was pulling the wrong way on the lever which didn't look right...
See what I mean I am completely confused!!!!
HELP
Thanks
Keith
This archive was generated by hypermail 2b30 : Tue Apr 24 2001 - 23:26:15 EDT