Hi Everyone...
I'm sure that someone here has installed a weber on a 2.25 that used to
have a Solex right... Well I have installed mine and for the life of me I
cannot figure out how to get the linkage to work properly (ie. pull down
instead of push up). People I have asked have told me that the linkage has
to be reversed, which makes perfect sense but when I try and do it I get
very confused. I have reversed the lever (bellcrank?) that is connected to
the arm that comes from the pedal (does this make any sense already?!?!?!)
so now the arm connects to it at the top instead of the bottom. I think that
this is right, it is the other lever that has the bend in it and connects to
the throttle lever of the carb that I can't figure out. there is a sprint
that connects to this lever and then to the cap at the end. When I turn this
lever around I can't put the spring on and when I finally did figure out how
to put the spring on the spring was pulling the wrong way on the lever which
didn't look right...
See what I mean I am completely confused!!!!
HELP
Thanks
Keith
This archive was generated by hypermail 2b30 : Tue Apr 24 2001 - 17:10:14 EDT