Date: Mon, 23 Apr 2001 14:09:17 -0400
From: "Sergi, Michael" <Michael.Sergi@us.rhodia.com>
Subject: LRO: RE: Re: Powder coating question
>Here is my method of painting the rims.
- -Sandblast rims.
- -Use rustoleum primer.
- -Use rustoleum Antique White (very close to limestone) paint from spray
cans.
- -Top with Pelucid clearcoat from POR using brush.
It worked quite well and seems to be very durable.
Thank you. I did this on one of my rims many years ago, but
I had forgotten the Rustoleum color I used until your timely
posting. I think this is the procedure I will follow when I remove
the wheels to get new tires installed. Powder coating wheels on a
utility vehicle that gets used seems like a good-looking, but trouble-
prone solution.
___________________________
C. Marin Faure
(original owner)
1973 Land Rover Series III-88
1991 Range Rover Vogue SE
Seattle
This archive was generated by hypermail 2b30 : Mon Apr 23 2001 - 20:48:31 EDT