-----Original Message-----
From: Chris
:
:1) Can I drill out the rivet bodies and use small, long screws and bolts
:with loctite to keep it all together.
Yes, the screws will and do work.
This will also allow you to replace the seal in the future, without
removing the front cover.
:2) I have to assume that the new replacement seal will fit snug
in the hole in the cover against that plate that fell off. Right?
Correct
Bruce F.
We were put on this earth to affirm that clothes do not make the man
and cleanliness is not next to godliness. We cheerfully acknowl-
edge that there is a proper place for suits and ties, but no one
has yet dug a hole big enough to bury them all.
This archive was generated by hypermail 2b30 : Fri Apr 13 2001 - 23:54:50 EDT