Re: [lro] Torque Question

From: Kirk Hillman (hillman88@telus.net)
Date: Sat Mar 15 2003 - 19:23:03 EST

  • Next message: Kirk Hillman: "Re: [lro] Torque Question"

    > I just mounted my tow bar assembly to the front of the 109 and could not
    find
    > the instruction sheet that came with it. Anyone want to speculate as to
    the
    > torque specs for the grade-8 hardware fasteners? I tightened the mounting
    > plates to the bumper to 80lbs and the fixing hardware for the actual tow
    bar
    > assembly to 60lbs. Too little, too much?
    Ron,
        There are a number of charts here and there on the net telling what the
    engineered torque specs are for any Gr. 8 bolt of X diameter. A search
    should give you what you need. If you don't find it, let us know what the
    pitch and size of the bolts are and we will tell you the max torque.

    Kirk
    _______________________________________________
    LRO mailing list
    LRO@land-rover.team.net
    http://land-rover.team.net/mailman/listinfo/lro



    This archive was generated by hypermail 2b30 : Sat Mar 15 2003 - 20:51:06 EST