Get a distributor from a Buick 400 and be done with ignition problems.
HEI with the coil integral in the cap lots of aftermarket goodies to make it
look and perform even better. Sparks fine down to 8 volts. No problems
starting even in -25C mornings.
-----Original Message-----
From: Patrick Parsons
To: LRO List
Sent: 22/01/2003 11:37 PM
Subject: [lro] Symptom returns
I just got back from holidays back home in the philippines, to find some
old
symptoms had returned to my 3.9 V8. It stalled and died, so I remember
Teri-Ann's advice that it is the ignition, and specifically the coil
causing
trouble, so off to NAPA. The "+" terminal had "smoke-marks" around it,
as if
it was letting out smoke, which I guess it was.
They gave me a generic looking coil, with a printed notice on it: Not
for
use with resistor systems. So I installed it without connecting the
resistor
doodad to the coil terminal, like it was on the last coil.
Car started just fine and runs well again (Thanks for the tip, Teri-Ann!
I
always check the coil now, so much easier than my last endeavour of
changing
fuel filters and fuel pump, and costs a ton less too).
Now, lately, it has developed a slow-to-start thing. It turns over fast,
but
doesn't catch... Used to spin twice and fire right up, but now, it kinda
spins and spins and sometimes it will only fire up on the second or
third
go.
I bet it has to do with that generic coil.
Anyone know what kind of coil I should look for? One I can get from NAPA
or
other parts house would be the best.
I mean, isn't a coil a coil? Shouldn't a V8 coil from a similarly
ignited
engine do the trick? How bespoke are these things?
--pat.
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro
This archive was generated by hypermail 2b30 : Thu Jan 23 2003 - 12:24:42 EST