Re: [lro] 2.25 Compression

From: Jim Hall (jimfoo@purplemountain.net)
Date: Mon Jan 13 2003 - 07:45:51 EST

Next message: Jim Hall: "Re: [lro] 2.25 Compression"

Previous message: Alan J. Richer: "Re: [lro] 2.25 Compression"
In reply to: John M. Baker: "[lro] 2.25 Compression"
Next in thread: John Cranfield: "Re: [lro] 2.25 Compression"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Not that I know of. Just make sure the ones with oil passages can get
the oil to the rockers.

John M. Baker wrote:
>
> Any drawbacks to shimming the rocker towers vs. installing shorter pushrods
> when shaving heads?
>
> John
> Bangkok
> 1975 SIII 109 2.25 Petrol
> _______________________________________________
> LRO mailing list
> LRO@land-rover.team.net
> http://land-rover.team.net/mailman/listinfo/lro

-- 
Jim Hall
1966 88" Elephant Chaser
http://webs.purplemountain.net/jimfoo/Foospage.htm
"You know, I never really damaged my Rover 'till I started wheeling 
with Jim." Mitch Stockdale
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro

Next message: Jim Hall: "Re: [lro] 2.25 Compression"
Previous message: Alan J. Richer: "Re: [lro] 2.25 Compression"
In reply to: John M. Baker: "[lro] 2.25 Compression"
Next in thread: John Cranfield: "Re: [lro] 2.25 Compression"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b30 : Mon Jan 13 2003 - 07:51:15 EST