Paul
My SIII has a twist knob with off, low, high speed settings.
The heater blower on mine is a 3 position toggel with off,
low, and high speed. The low speed goes through a resistor
before it goes to the blower motor.
Bill Fishel
----- Original Message -----
From: Paul Schultz <pschultz@vcmails.com>
Sent: Sunday, January 05, 2003 12:04:43 AM
To: <lro@koan.team.net>
Subject: [lro] Wiper switch
>
> What type of switch should I have for my wipers? Currently, I have a
> standard Lucas flip switch. I have a washer reservoir and pump installed
> under the bonnet but can't get it to work. In the Series III green bible,
it
> shows a 'knob' style switch.
>
> Also, should I have a 2 speed heater blower or 1 speed? Currently, I have
a
> flimsy aftermarket toggle switch.
>
> Oh, (for this purpose) my rig is a Series III
>
> Thanks,
>
> Paul Schultz
> 1967 5 door 109 (with the driveline/mechanicals/front dash... from a
Series
> III)
> pschultz@vcmails.com
> _______________________________________________
> LRO mailing list
> LRO@land-rover.team.net
> http://land-rover.team.net/mailman/listinfo/lro
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro
This archive was generated by hypermail 2b30 : Sun Jan 05 2003 - 01:28:40 EST