Con wrote: "Rebuilding may not be so easy. Getting the outer seal to fit
under the retainer
ring and get that ring to "crimp" into the caliper is a pain in the
..........."
I found that using a C-clamp and a large washer worked great to seat the
seal and ring. They just pop in place. A seal kit might not do the trick.
When I have had problems with my RR brake pistons not wanting to push back
into the caliper, it was due to the chrome flaking off of the piston. After
the chrome is gone the piston won't want to seal properly and they will
rust. I just replace them. Next time I'm going to try the SS pistons.
Brad H.
_______________________________________________
LRO mailing list
LRO@land-rover.team.net
http://land-rover.team.net/mailman/listinfo/lro
This archive was generated by hypermail 2b30 : Tue Nov 26 2002 - 09:19:36 EST