The nut is 1 11/16", I used a 1 3/4" socket from Sears and it worked fine.
To get the nut off, I removed the starter and wedged a chisel between the
flywheel and the bellhousing. Worked great.
Mike
64 SIIA
> -----Original Message-----
> From: george kase [mailto:gkase@ccfc.com]
> Sent: Tuesday, May 01, 2001 11:49 AM
> To: lro@Works.Team.Net
> Subject: LRO: starter dog/pulley nut size?
>
>
> I have seen this specified at 1 and 11/16 and also at 1 and 7/16...
> anyone know for sure what it really is for a 64 SeriesIIA 2.25 petrol?
> thanks in advance...
> George Kase
> Chicago USA
>
>
>
This archive was generated by hypermail 2b30 : Tue May 01 2001 - 15:13:41 EDT