So you are saying it should be against the retainer? Mine was all the
way at the back of the hole with mud'n'crud between the seal and
retainer.
The "manual" position is not the easiest thing to do with the modified
cover - I'd line it up at the front if replacing it from the outside.
THis serves 2 goodies:
1. It's easier to make sure the damn thing's straight,
2. It moves the seal enough to get it off the worn bit of the pulley.
Double-lip is good....8*)
ajr
This archive was generated by hypermail 2b30 : Tue May 01 2001 - 12:19:00 EDT