You do not pound ring gears- they are heated and they expand so as to just
fall into position.
----- Original Message -----
From: Jim Hall <jimfoo@qwest.net>
To: lro <lro@works.team.net>
Sent: Friday, April 27, 2001 8:52 PM
Subject: LRO: flywheel pins
> How does one remove the 3 pins in the flywheel? On a side note, to go
> along with the rotor in hand stories... I noticed the teeth on the ring
> gear were worn, so I decided to turn it around. After slowly and
> carefully working it off, I proceeded to pound it back on in the same
> direction. Doh!! So off again and on again..
> --
> Jim Hall
> 1966 88" Elephant Chaser
> http://www.users.qwest.net/~jimfoo
> "You know, I never really damaged my Rover 'till I started wheeling
> with Jim." Mitch Stockdale
This archive was generated by hypermail 2b30 : Sat Apr 28 2001 - 01:06:39 EDT