Foam brushes. $0.67 from Wynnton Hardware. Closed cell. Yes I mixed the whole batch at once and have not had any problems so far. I paint for a while, then mix with my cordless drill and paint mixing attachment. No problems. Easy painting, you just have to go quickly and keep wet edge on the brush.
Ron
>>> jarvis64@juno.com 04/20/01 15:59 PM >>>
What kind of brushes are you using, Ron? Did you mix it ALL up at once?
If so, how are you preventing hardening in the container?
curious bill
On Fri, 20 Apr 2001 14:20:03 -0400 "RON WARD" <ronward@synovustrust.com>
writes:
> Hi all,
>
> Got the front quarter panel and passenger door of the IIa painted
> last night. Using Dupont Centauri (2 quarts) mixed with Dupont
> Mid-temp Reducer (1 quart). The panels I have done look really
> good. No brush marks and oh what a shine! I got the two panels
> finished and for a moment thought I'd get the whole passenger side
> completed but that was before the lights turned really bright and
> bluish and then the giant roaches started to chase me through the
> green pasture under the front seat of the tarantula......
>
> Consumer Action Alert:
>
> Care should be taken to open and use Dupont Centauri paints outdoors
> or in a well ventilated room. All users and liquored up bystanders
> should wear proper OSHA certified breathing equipment or suitable
> ventilators. Failure to comply with the above warning may result in
> serious injury or death.
>
>
This archive was generated by hypermail 2b30 : Sat Apr 21 2001 - 21:57:44 EDT