To check if your distributor is worn put your timing light pickup on number
one plug lead and check the timing position. Change the pickup to number four
lead and check the timing position again. It should be in the same spot. If
it isn`t the distributor is worn. If it is jumping about it could be the
distrib. or a tired timing chain.
Dave
christian147@juno.com wrote:
> Its not that difficult to swap weights and springs from the used dist. to
> the new, just keep the spring and its weight together.
>
> Chris hall
This archive was generated by hypermail 2b30 : Tue Apr 10 2001 - 01:21:06 EDT